Contact us Multi Language

Pulverizer series

Mixer Machine series

Tablet press series

Pill making machine series

Capsule filling machine series

Granulation machine series

Sugar coating machine series

Tablet/capsule counting machine

Capping and sealing machine series

Filling and sealing machine series

Packing machine series

Ampoule filling and sealing machine

Aluminum and plastic packaging machine series

Aluminum foil sealing machine

Carton packing machine

Labeling machine
Production Line

Ampoule production line

Oral liquid production line

Eye drop production line

Antibiotic bottle powder line

Bottle Packing Auto Production Line

Soft gelatin production line


  Production Line


Instruction and features:
1: This machine is a type of improved product of tradition ampoules sealing machine.
2: We have overcome the previous problems by combing the two parts of machine into one Therefore we no longer need the “temporary connect and insert the pump to the pipe for additional gas combustion to support and enable turntable arrangement in initial starting phase”
The following is still required:
(1): Connect gas or petroleum then adjust switch for supporting combustion gas.
Positive results
(2): Focus flame can be easily set to meet average temperature required.
(3): After heating the ampoule bottle it will rotate slowly in the turntable.
(4): As the focus flame which is set has heated the bottle neck to a pliable state, then it will crimp the neck of the bottle sealing it and the nipping any excess material away: it will leave a bright and smooth in finish.
3: This new machine is quiet while working, the speed of sealing is fast and easy to setup for production. Its design is simple and open for ease of inspection: the arrangement of setup makes the process of rotating and depositing bottles into create for removal and caring to another location simple and easy.
The new Ampoule Sealing Machine is best suited for hospital, small medicine factory, science research units, and biological liquid manufacturing.
Please note costumers that this machine which is unequaled anywhere in the word is at present only produced in our factory in this Nation.

Main Technical Parameter:
1.Model No: RF-1
2.Applicable specification: 1-20ml
3.Production capacity: 600-800 unit/h
4.Net weight: 3.2kg
5.Voltage: 220V
6.Power: 7w
7.Gas pressure :≥ 0.4kpa
8.Pressure of combustion supporting:≥0.04kpa
9.Volume of packing (L x M x H) 300 x180 x350mm


Hand held electric lid-revolving machine

Instruction and feature:
Lid-revolving is an important working procedure after filling bottle.
A. We usually adopt automatic lid-revolving machine. However the price of automatic lid-revolving machine is 30000-100000RMB/per machine, we only adopt manual lid-revolving machine to the department of small amount production, then in order to waste capitals.
B. It is difficult to guarantee the homogenous degree of looseness or tightness due to the influence of various workers’ sex, age, health, and working time while lid-revolving , at the same time, it may cause to blow-by, exudates, mild and rot for packing bottles.
C. Our factory has solved this problem; the hand held electric lid-revolving machine consisted of body of lid-revolving machine, revolving head and multi-gear transformer. The head of lid-revolving covers the top of bottle’s lid; lid-revolving is connecting with body of lid-revolving machine. When you press the switch then the revolving head will rotate, it will take 0.3-0.5 seconds to rotate the bottle to reach tightness required.
D. The tightness or looseness of capacity should be adjusted cap gun body with the nut of pitch strand; therefore it is easy to ensure product quality. This machine adopts voltage of 220v; crust of transformer must touches with the land in case electrification.
E. The transfer has three timing gears, the user can choose suited gear according to the size of pitch strand, hand held electric lid-revolving machine has strong applicability, which is suited for the bottle cap of 10mm-50mm and fengyoujing bottle lid, some factories use the hand held electric lid-revolving machine instead of autonomic lid-revolving machine in order to save capitals, and obtain good efficiency.

Main technical parameter:
1: Power: 220v 50Hz
2: Output voltage: 36v, 28v, 20v
3: Output current: 0.6A
4: Production capacity: 30-60bottles/min
5::Diameter of spinning lid: 10-50mm
6: Container height: limitless
7: Overall dimension: 180 x110x 95mm3
8: Net weight: 3kg


Instruction and features:

A. This machine is a type of desk-top three knives capping machine, the surface of machine is made of the stainless steel material. It is easy to clean and prevent rustiness.

(a): The part of capping is made of high quality steel which is endurable.

(b): The part of knives capping is made of high –quality stainless steel and processing by heating.

B. The bottle capped isn’t rotated on working, the three knives with average 1200 is continued rotating to cap the edge of the bottle’s mouth ,the spring is fixed in the hammer of knife ,the distance between three knives can is adjusted by lightly.

(a): This machine is suited for the different size of bottles .The motor cover is also made of the stainless steel.

(b): This machine is the best choice for the army department, hospital, laboratory and small pharmaceutical factory.

Main technical parameter:
1: Applicable specification: 5-500ml
2: Production capacity: 20-60bottles /min
3: Motor power: 220v, 50 Hz, 0.90kw
4: Overall dimension: 700 x400 x600mm
5: Net weight: 30kg


Instruction and features:
1: SG series Manual capping clamp is the necessary capping tool for pop-can and aluminum cap in pharmaceutical factory, science research unit, labs and medicament department of hospital
2:The product is latest products of manual capping clamp in Nation ,some specification can fill up the blank of domestic shortage .The technology capacity has reached international level ,the Manual capping clamp has more advantages than usual electrical capping machine ,capping is safe,credible,tight ,slick, good sealing ,
3: Especially when it is processing in pharmaceutical factory and pills-making rooms, when the power is cutting suddenly or other electrical capping equipments have troubles, the machine can be replaced of use therefore insure normal operation in the production

Main technical parameter:

Model No







Capping diameter(mm)







           Overall dimension





DG-10 / 20 /100 / 500

Instruction and features:
A. DG series precise filling machine of Zhongnan meets the market requirement because of its precision, small size, application and low market price .The DG series continually inherits precision of Zhongnan large type filling machine which produces a series of products through simplification and condense.
B. The DG series machines are used widely in different scopes, including small and medium-size pharmaceutical factories, medicine-making office of hospitals, schools, laboratory in science and research unit, animal’s health food factories, food and beverage factories, chemical factories, pesticide factories, private enterprises and large scale enterprises.
C. Filling scope: eye drops, ampoule injection, vials injection, various oral liquid, injection liquid, cooking oil, honey, shampoo, chemical product, animal’s medicine and pesticide .etc
D. The production of transfusion, liquid, oral liquid and ampoule injection has the same production line with DG series production .It takes up a large sale share in the Nation because of excellent technology and reliable quality.
Main technical parameter:
(a): The power adopted a type of fixed gear transmission, adjusted speed by electron, running steadily and low noise, the speed is adjustable continuously.
(b): The metric pump is used a type of Zhongnan GCB4B filling machine .This machine won national silver award, the piston is used the innocuous and wearable sealing circle .Therefore ,the piston has compact structure ,with good sealing performance and long working life.
(c): The measurement of filling can be filled with the relative specification of filling machine, filling solution is from 0.2ml-1000ml, with light weight, convenient to use and putting optionally, the filling can be fine adjustment in order to satisfy different customers’ requirement.
(d): The power of 220V is adopted
1: Model No: DG (FZH)-10 DG (FZH)-20 DG(FZH)-100 DG(FZH)-500 DG(FZH)-1
2: Voltage (v) 220 220 220 220 220
3: Power (w) 20 30 60 120 20
4:Sub-package speed:40t/min 30t/min 30t/min 30t/min 40t/min
5;Liquid precision : ±0.5% ±0.5% ±1% ±1% ±0.5%
6: Weight (kg) : 5 6 13 18 5
7: Volume (mm): 200x 230x 360 ,200x 230x 360 ,310x 260x 530 ,352x380x540, 352 x380 x540
8:Sub-package cubage (ml) 0.2-10 5-20 10-100 50 -100 0.1-1

© Copyright by Royal Pharmaceutical Machinery Co.,Ltd All rights reserved.